Authorized AEG AEG Washing Machines Service

AEG Washing Machine Repair - Service Center in Egypt | Call 16062

AEG washing machine repair in Egypt for front-load washers, washer dryers, ProSense, ProSteam and Inverter Motor models. We diagnose no fill, no drain, no spin, door lock faults, violent vibration, loud spin noise, leakage, excess foam, program stops, E10, E20, E30, E40, E50, E60, E90, EHO and EF0 codes, PCB, inverter motor, drain pump, inlet valve, door lock, heater, bearings, shock absorbers and belt. Call 16062.

  • Original certified parts
  • 6-month written warranty
  • 1-hour arrival in Cairo
  • AEG-trained specialists
Call Now: 16062 WhatsApp
AEG Washing Machines
AEG
+15 years
24/7 available
6m warranty

AEG Washing Machine Repair - Electronic & Mechanical Diagnosis Before Parts Replacement

AEG Washing Machines

If you are looking for AEG washing machine service number, the key is choosing a technician who understands advanced AEG systems: PCB, ProSense load sensors, inverter motor, door lock, drain pump, inlet valve, temperature sensor and heater.

We service AEG 8kg, 9kg, front-load, washer-dryer, ProSense, ProTex, ProSteam and inverter models. Diagnosis starts with the code/symptom, then water pressure, inlet valve, pump filter, drain hose, door lock, water level sensor, inverter motor, belt, heater, temperature sensor, bearings, shock absorbers and PCB.

AEG washing machine service number: 16062 — error code, PCB, motor, pump, lock, bearings and shock absorber diagnosis, with final cost after inspection and before repair.
Fault Diagnosis

AEG Washing Machine Symptoms & Solutions

AEG washer faults usually appear as a code or visible symptom: no fill, no drain, no spin, door issue, loud noise, violent vibration or program stop.

01 AEG washer not filling with water Estimated after inspection Tech needed

Washer starts but water does not enter, or E10/E11/E12 appears.

Most likely causes

  • 1 Closed tap or weak pressure
  • 2 Blocked inlet valve filter
  • 3 Bent inlet hose
  • 4 Faulty inlet valve
  • 5 Water level sensor or PCB

What to do

Water pressure, filter, hose and valve are checked before judging PCB.

Estimated cost Estimated after inspection
02 AEG washer not draining Estimated after drainage check Tech needed

Water remains in drum or washer stops before spin with E20/E21.

Most likely causes

  • 1 Blocked drain pump filter
  • 2 Bent or blocked drain hose
  • 3 Faulty drain pump
  • 4 Foreign object in drain path
  • 5 Water level sensor issue

What to do

Filter, hose and pump are checked. Pump is not replaced before excluding blockage.

Estimated cost Estimated after drainage check
03 AEG washer not spinning Estimated by no-spin cause Specialist

Washer washes and may drain but does not spin or spins slowly.

Most likely causes

  • 1 Unbalanced load
  • 2 Water not fully drained
  • 3 Inverter motor or motion sensor
  • 4 Loose/broken belt
  • 5 Weak shock absorbers
  • 6 PCB or drive circuit

What to do

Drainage, balance, belt, motor and sensor are checked before replacing motor or PCB.

Estimated cost Estimated by no-spin cause
04 AEG washer door not opening or locking Estimated by lock Tech needed

Door remains locked after program or program does not start due to door issue.

Most likely causes

  • 1 Faulty door lock
  • 2 Water inside drum preventing unlock
  • 3 E40/E41 code
  • 4 Load pressing on door
  • 5 Door gasket or hinge

What to do

Do not force the door. Water, lock, gasket and hinge are checked first.

Estimated cost Estimated by lock
05 AEG washer vibrates violently during spin Estimated after balance system check Specialist

Washer moves or bangs violently during high-speed spin.

Most likely causes

  • 1 Shipping bolts not removed
  • 2 Unbalanced load
  • 3 Weak shock absorbers
  • 4 Damaged suspension springs
  • 5 Bearing wear
  • 6 Uneven floor

What to do

Shipping bolts, leveling, load and shocks are checked before judging bearings or drum.

Estimated cost Estimated after balance system check
06 Loud noise during AEG washer spin Estimated after drum and bearing inspection Specialist

Grinding, aircraft-like noise, banging or rubbing during spin.

Most likely causes

  • 1 Bad drum bearings
  • 2 Drum spider issue
  • 3 Weak shock absorbers
  • 4 Foreign object between drum and gasket
  • 5 Belt or pulley

What to do

Drum play and noise source are checked. Ignoring loud noise can damage drum and spider.

Estimated cost Estimated after drum and bearing inspection
07 AEG washer not heating water Estimated by heating circuit Tech needed

Program takes longer, clothes do not clean well or E60 appears.

Most likely causes

  • 1 Faulty heater
  • 2 Faulty temperature sensor
  • 3 Scale on heater
  • 4 PCB not sending heating command
  • 5 Wiring issue

What to do

Heater, sensor and wiring are measured before replacement.

Estimated cost Estimated by heating circuit
08 AEG washer shows EHO or Ebo Estimated after power test Tech needed

Washer stops or displays code related to power instability.

Most likely causes

  • 1 Home voltage fluctuation
  • 2 Weak socket or extension
  • 3 Voltage drop or surge
  • 4 PCB affected by power
  • 5 Unstable wiring

What to do

Power source is checked first. Do not use weak extension. PCB is judged only after supply test.

Estimated cost Estimated after power test
09 Excess foam or EF0 code in AEG washer Estimated after cause check Tech needed

Washer stops or fails to drain due to excess foam or possible leakage.

Most likely causes

  • 1 Wrong detergent
  • 2 Too much detergent
  • 3 Minor water leakage
  • 4 Pressure sensor issue
  • 5 Drain blockage

What to do

Reduce detergent and run rinse, then check leakage, pressure sensor and drainage if recurring.

Estimated cost Estimated after cause check
Capacities

We Service All AEG Washing Machine Types & Capacities

AEG washing machines come in different capacities and technologies: 8kg, 9kg, front-load, washer dryers, steam and inverter models. Each model needs different diagnosis.

Most Popular
Suitable capacity for medium families

AEG 8kg Washing Machine

Daily use and multiple programs
  • ProSense
  • inverter motor
  • 1400 RPM
  • display
  • door lock
Price range Estimated after inspection
Most Popular
Larger family capacity

AEG 9kg Washing Machine

Large loads and light bedding
  • Load sensor
  • inverter motor
  • pump
  • bearings
  • shocks
Price range Estimated by fault and model
Most Popular
Front door / ProTex drum

AEG Front Load Washer

Fabric care and lower consumption
  • ProTex
  • door lock
  • gasket
  • drain pump
  • inlet valve
Price range Estimated after diagnosis
Most Popular
Washing and drying in one appliance

AEG Washer Dryer

Homes needing space saving
  • Drying
  • humidity sensor
  • fan
  • condenser
  • heater
Price range Estimated by drying circuit
Most Popular
Steam programs for fabric care

AEG ProSteam Washer

Delicate fabrics and wrinkle reduction
  • ProSteam
  • temperature sensor
  • heater
  • PCB
  • steam programs
Price range Estimated by steam circuit
Most Popular
Quiet and energy-efficient operation

AEG Inverter Washing Machine

Long use and lower noise
  • Inverter motor
  • motion sensor
  • PCB
  • belt
  • balance
Price range Estimated by motor and PCB

Prices are approximate and unofficial. They vary by washer type, age, drum condition, PCB, motor, spare parts availability and repair complexity.

Models

AEG Washing Machine Models We Service

We service AEG washers by capacity, technology and fault type. When calling 16062, tell us capacity, front-load/washer-dryer type and any displayed code.

Best Seller
AEG 6000 Series AEG 6000 Series Washer
Approx. 8kg
ProSenseInverter motorQuick programsDoor lockDrain pump
Best Seller
L6FBK841B AEG Front Load Washer
8kg / 1400 RPM
ProTex drumLCD displayInverter motorLoad sensorSteam programs depending on model
Best Seller
AEG ProSteam AEG ProSteam Washer
Depending on model
SteamTemperature sensorHeaterPCBCare programs
Best Seller
AEG Washer Dryer AEG Washer Dryer
Wash and dry
DryingFanCondenserHumidity sensorHeating circuit
Best Seller
AEG Inverter Washer AEG Inverter Washer
Multiple capacities
Inverter motorMotion sensorPCBBeltLoad balance
Technologies

AEG Washing Machine Technologies We Repair

AEG washer repair starts by understanding the technology inside the unit. A program stop may be caused by ProSense load sensor, door lock, PCB, water pressure, excess foam or voltage instability.

01

ProSense Load Sensing

ProSense measures laundry load and adjusts cycle time, water and energy. Faulty readings can extend, stop or prevent cycles.

Benefits
  • Saves water and energy
  • Protects clothes
  • Adjusts cycle time by load
Drawbacks
  • Unbalanced load affects reading
  • Sensor fault may stop program
Common faults

Long cycle, program stops, abnormal time, no start

02

ProTex Drum

ProTex drum reduces fabric friction. Fabric damage or drum noise requires checking drum, gasket, bearings and spider arm.

Benefits
  • Better fabric care
  • Less friction
  • Suitable for delicate clothes
Drawbacks
  • Drum play can damage clothes
  • Bearing failure affects balance
Common faults

Fabric damage, drum noise, rubbing, shaft leakage

03

Inverter Motor

Inverter motor provides quiet and efficient operation but requires PCB, motion sensor, belt and wiring checks before replacement.

Benefits
  • Lower noise
  • Less vibration
  • Better energy efficiency
Drawbacks
  • Fault can mimic PCB issue
  • Voltage fluctuation affects drive circuit
Common faults

No spin, drum not turning, motor code, sudden stop

04

ProSteam

Steam technology reduces wrinkles and cares for fabrics. Faults appear as weak steam, steam program stop or heating code.

Benefits
  • Reduces wrinkles
  • Refreshes clothes
  • Better delicate care
Drawbacks
  • Needs accurate heater and sensor
  • Scale may affect steam circuit
Common faults

Weak steam, steam program stops, heating code

05

Water Inlet & Drain System

AEG washers use inlet valve, drain pump and level sensor. E10 and E20 usually relate to water inlet or drainage.

Benefits
  • Precise water control
  • Flood protection
  • Safe drain before spin
Drawbacks
  • Blocked filter stops cycle
  • Weak water pressure appears as code
Common faults

E10, E20, no fill, no drain, water remains in drum

06

Electronic Door Interlock

Door interlock prevents operation when door is open. E40 or no start often relates to lock, gasket or load pressure on door.

Benefits
  • Safety during operation
  • Prevents leakage
  • Protects during spin
Drawbacks
  • Failure prevents cycle start
  • Overloading presses on door
Common faults

E40, door not opening, door not locking, no start

07

Heater & Temperature Sensor

Heater raises water temperature and sensor sends reading to PCB. E60 or weak heating needs heater and sensor testing.

Benefits
  • Better washing at proper temperature
  • Protects fabrics from wrong heat
  • Supports cotton and allergy programs
Drawbacks
  • Scale affects heating efficiency
  • Bad sensor stops program
Common faults

E60, water not heating, long program, electrical trip

08

Bearings, Shocks & Balance System

Vibration and loud noise may be bearings, shocks, springs, unbalanced load or shipping bolts not removed.

Benefits
  • Stable spin
  • Lower noise
  • Protects cabinet and drum
Drawbacks
  • Ignoring loud noise damages spider and drum
  • Overload accelerates shocks and bearings wear
Common faults

Violent vibration, aircraft-like spin noise, drum play, rusty leakage

Error Codes

AEG Washing Machine Error Codes

AEG washer codes guide the fault area, but do not mean immediate part replacement. They guide diagnosis: water, drain, door, motor, heating, PCB or power.

Code Meaning Likely cause Est. cost Level
E10 / E11 / E12 Water inlet fault Weak water pressure, blocked inlet filter, bent hose, inlet valve or level sensor Estimated after inlet diagnosis Medium
E20 / E21 Drainage fault Blocked pump filter, bent drain hose, faulty pump or drain path blockage Estimated after drain diagnosis Medium
E30 Leakage or anti-flood protection Water in base, internal hose, door gasket or overfill Estimated after leak source Critical
E40 / E41 Door lock fault Door not closed, bad lock, gasket pressure or overloading Estimated by lock Medium
E50 / E54 / E56 Motor or drum movement fault Inverter motor, belt, motion sensor, PCB or overload Estimated after motor and drive test Critical
E60 Heating fault Heater, temperature sensor, scale, wiring or PCB Estimated by heating circuit Medium
E80 Program selector fault Selector between programs, moved during operation or software glitch Estimated after program diagnosis Low
E90 / E91 / E92 / E93 / E94 Communication fault between PCB and display Communication cable, display module, PCB, programming or voltage issue Estimated after PCB and wiring check Critical
EHO / Ebo Power supply instability Voltage fluctuation, weak socket, extension cord or PCB protection Estimated after power source check Medium
EF0 / EF3 Excess foam or possible leakage Too much detergent, wrong detergent, leakage or drain issue Estimated after foam and leak check Medium
E10 / E11 / E12 Medium

Water inlet fault

Weak water pressure, blocked inlet filter, bent hose, inlet valve or level sensor

Estimated after inlet diagnosis
E20 / E21 Medium

Drainage fault

Blocked pump filter, bent drain hose, faulty pump or drain path blockage

Estimated after drain diagnosis
E30 Critical

Leakage or anti-flood protection

Water in base, internal hose, door gasket or overfill

Estimated after leak source
E40 / E41 Medium

Door lock fault

Door not closed, bad lock, gasket pressure or overloading

Estimated by lock
E50 / E54 / E56 Critical

Motor or drum movement fault

Inverter motor, belt, motion sensor, PCB or overload

Estimated after motor and drive test
E60 Medium

Heating fault

Heater, temperature sensor, scale, wiring or PCB

Estimated by heating circuit
E80 Low

Program selector fault

Selector between programs, moved during operation or software glitch

Estimated after program diagnosis
E90 / E91 / E92 / E93 / E94 Critical

Communication fault between PCB and display

Communication cable, display module, PCB, programming or voltage issue

Estimated after PCB and wiring check
EHO / Ebo Medium

Power supply instability

Voltage fluctuation, weak socket, extension cord or PCB protection

Estimated after power source check
EF0 / EF3 Medium

Excess foam or possible leakage

Too much detergent, wrong detergent, leakage or drain issue

Estimated after foam and leak check
Diagnostic Mode

AEG Washing Machine Technical Diagnosis

AEG washer diagnosis starts with code or symptom, then the related circuit. PCB, motor or pump is not replaced before checking valves, filters, sensors and wiring.

How to enter test mode

  1. 1 Identify washer model, capacity and type: front-load or washer-dryer
  2. 2 Read displayed code if present
  3. 3 Ask whether the issue is filling, draining, spinning, door, noise or heating
  4. 4 Check water pressure and inlet valve for E10 codes
  5. 5 Check pump filter and drain hose for E20 codes
  6. 6 Check door lock and gasket for E40 codes
  7. 7 Check motor, belt and sensor for E50 codes
  8. 8 Check heater and temperature sensor for E60 codes
  9. 9 Check power supply for EHO codes
  10. 10 Check bearings, shocks and drum for noise/vibration
  11. 11 Check PCB and wiring after excluding simpler causes

What it tests

1
Water pressure and inlet valve test Checks tap, filter, hose and valve before judging PCB.
2
Drain pump and filter test Cleans pump filter and checks drain path before pump replacement.
3
Door interlock test Checks lock, gasket, hinge and door state for E40.
4
Inverter motor test Checks motor, sensor, belt and PCB when drum stops or no spin.
5
Heater and temperature sensor test Measures heater and sensor resistance and checks wiring for E60.
6
Bearings and drum test Manual drum movement, play/noise and leakage source inspection.
7
Shock absorbers and balance test Checks drum bounce, leveling and shipping bolts.
8
PCB and power supply test Checks power, wiring and sensors before judging PCB.
Pricing

AEG Washing Machine Repair & Spare Parts Cost

AEG washer repair cost varies by washer type: front-load, inverter, ProSense, ProSteam or washer dryer, and by fault: inlet valve, pump, door lock, motor, PCB, heater, bearings, shocks or leakage. Final cost is determined after inspection.

Spare Parts

12
  • AEG Drain Pump For E20 or no-drain faults
    Estimated by model
  • Water Inlet Valve For E10 or no-fill faults
    Estimated by outlet count
  • AEG Door Interlock For E40 or door not locking
    Estimated by lock
  • AEG Door Gasket For water leakage, smell or poor door sealing
    Estimated by size
  • AEG Heating Element For E60 or no water heating
    Estimated by wattage
  • Temperature Sensor For temperature reading or program stop
    Estimated by code
  • Inverter Motor For drum not turning/no spin after belt and PCB check
    Estimated after full diagnosis
  • AEG Washing Machine PCB Not replaced before checking sensors, power and wiring
    Estimated after inspection
  • Bearings & Oil Seal For loud noise, drum play and rusty leakage
    Estimated after drum inspection
  • Shock Absorbers For violent vibration during spin
    Estimated by set
  • Belt & Pulley For drum not rotating or squealing noise
    Estimated by model
  • Steam Circuit Repair For ProSteam models with weak steam or heating code
    Estimated by circuit

Labor & Inspection Fees

  • Technical inspection and fault diagnosis Estimated by area and washer type
  • Error code diagnosis Estimated by code and model
  • Inlet and drainage diagnosis Estimated after valve and pump check
  • No-spin and motor diagnosis Estimated after belt, motor and PCB check
  • Loud noise and bearing diagnosis Estimated after drum inspection
  • PCB and power diagnosis Estimated after power and sensor checks

⚠️ Listed prices are approximate and unofficial. They may vary depending on fault type, washer age, drum condition, spare parts availability and repair complexity. Final cost is confirmed before repair.

Care & Maintenance

AEG Washing Machine Preventive Maintenance

Advanced AEG washers need correct use to protect motor, PCB and drum. Key points are filter cleaning, proper detergent, no overloading and voltage protection.

Monthly

Clean drain pump filter regularly

Blocked filter is a common cause of E20 and drainage failure.

Daily

Use low-foam automatic detergent

Excess foam may cause EF0 and affect pressure sensor and drainage.

Daily

Do not overload the drum

Overloading strains motor, shocks, bearings and affects ProSense.

Daily

Distribute clothes inside drum

Heavy items on one side cause imbalance and vibration during spin.

Weekly

Clean door gasket after washing

Water and residue in gasket cause smell, leakage and door issues.

Daily

Avoid weak extension cords

EHO/Ebo can appear due to voltage instability or weak power source.

Yearly

Check shipping bolts after installation

If new washer vibrates violently, make sure rear shipping bolts are removed.

Weekly

Do not ignore loud spin noise

Loud noise may start as bearing wear and become spider/drum damage if ignored.

Customers

AEG Washing Machine Repair Reviews

غسالة AEG كانت بتعرض E20 ومش بتصرف. الفني نضف فلتر الطلمبة وفحص الخرطوم والطلمبة، واتشرح العطل قبل الإصلاح.

غسالة AEG 8 كيلو
أحمد عادل التجمع الخامس

الغسالة كانت بتتهز جامد في العصر. الفني فحص المساعدين والميزان ومسامير النقل، وطلع السبب في المساعدين.

غسالة AEG تحميل أمامي
منى خالد الشيخ زايد

كان ظاهر كود EHO وكنت فاكر الكارتة باظت. الفني فحص الكهرباء والمقبس الأول ووضح إن المشكلة من تذبذب الجهد.

غسالة AEG Inverter
محمود حسين مدينة نصر

الغسالة كانت صوتها عالي أثناء العصر. الفني عمل اختبار للحلة والرولمان وشرحلي خطورة تأخير الإصلاح.

غسالة AEG ProSense
FAQ

FAQs About AEG Washing Machine Repair

What is AEG washing machine service number in Egypt?
AEG washing machine service number is 16062. Tell us model/capacity and any displayed code.
What does E10 mean on AEG washer?
E10 usually indicates water inlet problem: pressure, valve filter, hose, inlet valve or level sensor.
What should I do with AEG E20 code?
E20 usually indicates drainage problem. Pump filter, hose, pump and drain path are checked.
Why is my AEG washer not spinning?
It may be drainage, load imbalance, belt, inverter motor, sensor, shocks or PCB.
Why does AEG washer vibrate violently?
It can be unbalanced load, uneven floor, shocks, springs, bearings or shipping bolts.
Loud spin noise — is it bearings?
It can be bearings, but also foreign object, shocks, belt, pulley or drum spider.
Does EHO/Ebo mean PCB failure?
Not necessarily. EHO/Ebo often relate to power instability. Socket and voltage are checked first.
Why does AEG washer not heat water?
It can be heater, temperature sensor, scale, wiring or PCB. E60 may appear.
How much does AEG washer repair cost?
AEG washer repair cost varies by fault, capacity, age, drum condition, PCB, motor and spare parts.
Do you provide AEG customer service or agency repair?
We provide specialized AEG appliance repair service. Call 16062.
Available 24/7

Need AEG Washing Machine Repair? Call 16062

Looking for AEG washing machine repair, AEG service number, customer service, hotline or technician near you? Call 16062. Tell us model and symptom: no fill, no drain, no spin, door issue, loud noise, vibration, leakage, E10, E20, E40, E60, E90, EHO or EF0.

Call: 16062 WhatsApp
1-hour response
6-month warranty
Original parts